MRO procurement

How to Stop MRO Savings Leakage for Multi-Plant Manufacturers in 2027

By Hala Jalwan · Published

Key takeaways
  • MRO savings leakage is the gap between the price a multi-plant manufacturer negotiated for maintenance, repair and operations (MRO) supplies and the price its plants actually pay. The contract is real; the savings never reach the P&L.
  • Savings leak wherever the compliant route is slower than the workaround: urgent off-contract buys, the same part bought at different prices across plants, tail spend nobody negotiates, duplicate SKUs in a fragmented item master.
  • Plants are not choosing to leak savings. They are choosing uptime. Until now, every control that protected the contract added a review step, so compliance cost speed, and centralizing the buying only moved the queue.
  • The leak closes when the compliant path is also the fastest one. Specialized procurement agents like Sheldon make that the default: a request arrives in Teams or email, Sheldon takes it from intake to purchase order, applies the contract or runs the competition, and negotiates the small deals nobody has time for, with no extra friction, review steps or headcount. Rivio customers see about 8% savings on the negotiations Sheldon runs.

What is MRO savings leakage?

A bearing fails on a night shift and the maintenance lead calls the supplier she knows, who can deliver by morning. A technician needs a few hammers and buys them where he always has. A requester takes one look at the forms a compliant order needs and finds a faster route. None of them did anything wrong. And yet, six months earlier, procurement had already negotiated a contract for that exact bearing, and for those hammers, at a lower price. The contract is real, the savings are in the business case, and none of it reached these purchases.

That gap is MRO savings leakage: the difference between the price a company could have paid for supplies and the price it did pay. Where a contract price exists, it shows up as purchase price variance (PPV). Where a part was bought off-contract from a supplier nobody priced, it often shows up nowhere, which is why savings realization is measured at invoice level, not by contract discount.

Where do multi-plant manufacturers lose MRO savings?

Every plant buys for uptime first and price second, and that is the right instinct. But each plant, acquisition and local supplier adds another buyer, another price list and another item master, and no central team can see thousands of small purchases. The leaks cluster in six places:

  1. Same part, different supplier, different price. BCG's 2016 analysis of MRO in manufacturing found that plants often use different suppliers for the same part, or one supplier without bundling volume across plants. Nobody gets the volume price because nobody sees the volume.
  2. Urgent buys made where the contract is not in front of the buyer. A free-text PO line or a P-card turns a negotiated price into a list price. A 2019 Hackett Group study put the loss at up to 16% of negotiated savings, and 75% of its respondents blamed friction: no self-service or guided buying.
  3. Tail spend nobody negotiates. In one BCG example, 1,300 vendors accounted for 20% of MRO spend but 45% of purchase orders. Hand-quoting an $800 spare part costs more than it saves, so the first price wins.
  4. Orders waiting on a spec check. Technical audits matter, but when every order queues behind one, urgent buyers route around it.
  5. Duplicate SKUs in a fragmented item master. In a 2024 survey of 250 procurement and operations leaders at manufacturers, only 39% reported full data uniformity across MRO materials. One bearing under five descriptions cannot be bundled or priced against a contract.
  6. Volume and spec drift. Buy less than the contract assumed and the volume tier is missed. Let the approved list grow and the discount erodes on fully compliant orders. Nobody tracks actual against projected volume, so the gap surfaces at the renewal.

Why do plants take the fast route over the contract?

Because the compliant route is the slow one, and slow is expensive. Unplanned downtime costs the typical industrial business about $125,000 an hour, according to ABB's 2023 survey of 3,215 plant maintenance decision-makers (respondent estimates, not audited records). Siemens' 2024 report puts it at about $1.4 trillion a year, or 11% of revenue, for the world's 500 largest companies. Both figures count every cause of downtime; they size the stakes, not the savings.

Set a few percent on a bearing against an hour of that, and the fast route is the rational call. Nobody is choosing to leak savings. They are choosing speed. Compliance has always run through human review, and human review has limited capacity, so compliance has always cost speed. An agent like Sheldon has nearly unlimited capacity for parallel requests. It removes the choice between compliance and speed, and with it the hidden cost of compliance that shows up as PPV, or does not show up at all.

See how Sheldon keeps every MRO buy on contract.

Book a demo

Why doesn't centralizing all MRO buying stop the leakage?

Centralizing moves the problem from the plant floor to a central queue but doesn't solve the capacity bottleneck. Procurement leaders at multi-plant manufacturers tell us they do not want to slow plants down. They want plants to keep buying while every purchase follows the approved supplier list and the contract: decentralized buying with centralized control. Until recently that meant more people reviewing more requests. It no longer does. An agent in the tools plants already use, reading each request in plain language and applying the central rules, gives you centralized control over MRO spend with no extra red tape, review steps or headcount.

How do you stop MRO savings leakage?

The leak closes when the compliant path is also the easiest one. Rivio's procurement agent, Sheldon, makes it the easiest one: it removes the friction at intake, puts the contract and the approved suppliers in front of every request, and negotiates the orders nobody has time for. Rivio customers see about 8% savings on the negotiations Sheldon runs, compared with what they were paying before for the same items. In one MRO deployment at a European industrial manufacturer, request-to-purchase-order time in the first category was cut by about 35%, and median savings on MRO spend came to 4.2%. Here is how a request moves through it.

1. Intake without friction

Send Sheldon a Teams message or an email with what you need, in plain language. No portal to learn, no form to fill in. Sheldon opens the request in your procurement system and carries it through to the purchase order, so the fast route and the compliant route become the same route. Punchout catalogs and guided-buying portals help, but nobody opens a portal when a line is down. Intake where people already work is what stops maverick spend.

2. Check the contract first

Sheldon goes through your punchout catalogs and approved vendor list before anything else. If the part is pre-negotiated, Sheldon applies the contract price—the price your team worked hard to secure. If the same part exists under five descriptions across plants, it matches the request to the right standard item across every ERP you run, so the contract applies.

3. Spot buy when the contract is not enough

If no approved vendor has a good price, or the part is not on contract, Sheldon does a spot buy: finds vendors, runs the RFQ and negotiates, even on orders too small for a buyer to touch. It runs the spec audit in the same pass, because the procurement brain holds the exact specifications your plants use, so the check that used to hold orders in a queue no longer does. The purchase goes to the right approver inside your thresholds, the purchase order goes out, and every step is logged.

Take the hammers. Sheldon finds nothing on contract, gets three quotes, pushes the lowest one down further, confirms the spec, and has the order ready for approval before the technician would have finished filling in a form.

4. Negotiate the deals nobody wants to

Tail spend is where negotiation gets skipped, because nobody wants to run an RFQ for an $800 order. Sheldon negotiates every one of those orders: it takes the quotes, pushes back on price and terms, and settles the deal before the order moves. Nobody on your team has to pick up the phone.

5. Keep score

Sheldon has your data across every ERP and system, so the savings-realization analysis that would take a team weeks is ready within minutes, by plant: every price paid against the contract or winning-bid price, the orders with no contract price to compare against, contract compliance and spend under management. Most teams have never seen that number, because it takes a recurring audit nobody owns.

See what Sheldon can recover from your MRO spend.

Book a demo

What makes Sheldon different

Rivio builds a procurement brain for each company from its policies, vendors, contracts and buying history. Sheldon works from that brain across every ERP and system the company runs, even when there are several, which is why it can apply the right contract, match the right part and measure savings by plant without a data project first. People set the rules and approve what matters. Everything else, from intake to purchase order, Sheldon carries.

It takes on the repetitive work your team already does (raising requests, chasing quotes, chasing approvals) and the work nobody gets to (the small orders that never get negotiated, the follow-ups that fall through the cracks). Catalogs, portals and managed MRO providers help with pieces of this, but each needs people to run it. An agent does the work itself, inside the rules you set.

Newsletter

New posts, straight to your inbox.

Industry insights, the topics procurement teams are talking about, and first word on Rivio launches and events.

Frequently asked questions

How do I know how much MRO savings leakage we have?

Pull three numbers by plant: purchase price variance against the contract or winning-bid price at invoice level, the share of MRO purchase orders with no contract price to compare against, and contract compliance, meaning spend with approved suppliers as a share of the total. The second number is usually the surprise. Sheldon produces all three within minutes from the systems you already run.

What happens to the contracts and suppliers we already have?

They come first. Sheldon checks your punchout catalogs and approved vendor list before anything else and applies the contract price when the part is on it. Approved suppliers see more volume, not less, because the orders that used to go around them now go through them. A spot buy happens only when nothing on contract fits.

Where do my people stay in control?

Your team sets the rules: thresholds, approvers, and which categories and plants Sheldon handles. Every purchase routes to the right approver inside those rules, and every quote, counter and approval is logged. People approve what matters; Sheldon does the chasing.

Do we need to consolidate ERPs or clean up the item master first?

No. Sheldon works across every ERP and system you run, matches the same part under different descriptions to the right standard item, and measures savings by plant without a data project first. Cleaning the item master is still worth doing. It just stops being a prerequisite.

Where should a multi-plant manufacturer start?

With one MRO category where the leak is obvious, usually spare parts or consumables bought across several plants. Sheldon works inside the systems you already run, such as Coupa, Zip, SAP Ariba, Oracle and Workday, so there is nothing to migrate, and customers are live in under a month. Widen from there.

Sources

  1. Boston Consulting Group (Amit Ganeriwalla and Karthik Valluru), Capturing the MRO Advantage in Manufacturing, November 2016.
  2. ABB (survey by Sapio Research, July 2023), Value of Reliability: ABB Survey Report 2023.
  3. Siemens, The True Cost of Downtime 2024, 2024.
  4. The Hackett Group (Jimmy LeFever and Amy Fong), Maverick Spend Report, based on the 2019 User Experience and Maverick Spend Study, March 2019.
  5. Verusen, WBR Insights and ProcureCon MRO, Future Strategies for MRO Inventory Optimization, survey of 250 procurement and operations leaders, 2024.

See what Sheldon can take off your team's plate.

From intake to purchase order, inside the rules you set. Book a demo and see it on your own MRO spend.

Book a demo
Back to blog